|
|
TYPE: Single-seat ultralight helicopter kitbuilt.
PROGRAMME: First flight 2000; total 130 hours of airborne time by July 2003. Holds Canadian amateur-builder's certificate of airworthiness.
CUSTOMERS: Prototype, plus one sold to US owner by mid-2003.
COSTS: Kit US$19,995; or US$17,995 upon evidence of helicopter flying instruction (2003).
DESIGN FEATURES: Minimalist helicopter to FAR Pt 103 regulation. Vertically mounted engine driving main rotor via toothed belt as second-stage reduction gear. Tailboom supported by V strut.
Semi-rigid main rotor. Unique control system: main rotor control from floor-mounted stick and collective through control mixer at base of main mast, then through push tubes in main mast to base of swashplate; last-mentioned is contained within mast and supported by a pushrod in rotor shaft. Control rods each side of pushrod transmit inputs through rotor shaft to control lever on top of main shaft and down to blade pitch horns through pitch links. Tail rotor controlled by foot pedals through Bowden cable to actuating lever on tail rotor shaft.
Main rotor speed 500rpm; tail rotor 2,500rpm. Quoted build time 200 hours.
STRUCTURE: Frame of 6061-T6 aluminium; glass fibre tripod landing gear; carbon fibre tailboom and V struts. Main rotor hlades constructed upon aluminium spar bonded to wrapped aluminium sheet skin; foam sealer plugs both ends. Titanium main gearbox; aluminium fuel tanks.
POWER PLANT: One 44.7kW Zanzottera MZ202 two-cylinder two-stroke with electric starter and directly attached primary reduction gear. Clutch and overspeed provision during autorotation. Flexible couplings and flexible driveshaft transmit power to tail rotor. Total fuel 19 litres in two tanks. Jane's All the World's Aircraft, 2004-2005 Links: DATAEN # "Mosquito"
| siddharth, e-mail, 25.10.2014 | reply |
sir i am an engineering student from india, i want to build a mosquito helicopter producing a lift that it can lift an average weighted person, so would u please tell me that from where i can get the parts, specially engine | | manjunath, e-mail, 05.11.2014 | reply |
dear sir / madam
i searching for rotor head assembly and tail rotor assembly kit for my mosquito model single person handled helicopter can i get these parts in kit form so that i can demonstrate my own helicopter please let me know that could i get these parts and also suggest me other manufacturer where i could get these part if it is not available with you
with regards
manjunata.R | | leong, e-mail, 28.07.2010 | reply |
hi! i from malaysia,if i want to buy mosquitor helicopter how can i buy it?? have a anny intro mosquitor helicopter DVD??? | | zuben, e-mail, 27.08.2010 | reply |
Are there any dealer in india. | | giano de aquino xavier, e-mail, 30.09.2013 | reply |
gostaria de ter a projeto de montagem desse helicoptero, sou do brasil, envia para mim, pode ser em ingles mesmo que eu dou um jeito, amo voar de helicoptero. abraços! | | doug macdonald, e-mail, 17.02.2011 | reply |
can i make one from a kawasaki kz 750 motor? | | sebastiao costa, e-mail, 15.03.2011 | reply |
gostaria de saber se consigo o projeto na internete e se vc tem o endereço grato!... sebastiao Brasil. | | SANJAY PUNDALIK, e-mail, 01.04.2011 | reply |
MOSQUOTO IS VERYLIGHT AND IT IS VERY USEFUL INRURALAREA ESPECIALLY ININDIA EVENTHIS IS VERY USEFUL FOR ANY EMERGENCY I LIKE THEMOSQUOTO | | sebastiaocosta, e-mail, 18.04.2011 | reply |
se possÃvel me envia end internete onde consigo a planta do mosquito,grato sebastiao brasil | |
| | Kipkorir maritim, e-mail, 14.06.2011 | reply |
Show me the plan i would want to construck one here in kenya! | | gilson, e-mail, 16.07.2011 | reply |
Amigo se você tiver as plantas do mosquito manda para mim também, abs. | | Tiones, e-mail, 17.10.2011 | reply |
Hi, if possible, send me the plans of the mosquito XE helicopter. thanks. | | John, e-mail, 09.11.2011 | reply |
hey, I'm building a one man helicopter in my cad class, working on constructing one hear soon. I liked your design of the mosquito XE helicopter, I was curious if you could send me a schematic of it.
Thanks,
John | | luta, e-mail, 27.11.2011 | reply |
how are you to love this helicopter and Mode has been built. | | Ststynzin, e-mail, 15.12.2011 | reply |
Hello.....iam 15 year of age .i saw ur design fight its so nice to look.i also study the function of it but swash control system is differ from other .so can u send me swash schematic image....... | | suman babu.s, e-mail, 04.07.2013 | reply |
hello friend i want to see assembly parts and design.please sent me. | | ARJUN NARAYANAN, e-mail, 21.03.2012 | reply |
Hello Sir,
Iam ARJUN NARAYANAN, from India. 1.please tell me whether the chain drive from engine to mast will be better or direct drive to mast. 2. what should be the length of main rotor for single and two seater? 3.is it safe to fix aluminium or wood rotos? 4.if so how much thickness it should be? please clear my doubts. ifit is possible could you please send me the plans of the mosquito XE helicopter.
MANY THANKS IN ADVANCE.
Kind regards,
ARJUN NARAYANAN | | wakeel, e-mail, 31.03.2012 | reply |
i want a made helicopter plz tell me send me details how to assemble main rotor bike part | | rahul kumar gupta, e-mail, 02.05.2012 | reply |
name the part of the mousquito helicopter. How it fit to each other. | | mahmoud, e-mail, 29.05.2012 | reply |
peace on u ,mosqito xe helicopter the best one to me , plz if u can send me plans or constraction epuipements ,peeices about it after ur permetion .i apreciate that.thanks |
|
| |
|
Do you have any comments ?
|
| 
Virtual Aircraft Museum
All the World's Rotorcraft
|
