Do you want to get your funds back from the SCAMMERS ?Well I was also a victim of this until I saw a review about a Recovering firm that helps with such a problem. LORD HCKR ULTIMATE their email: L.H.ULTIMATE @ FASTSERVICE . COM Or WhatsApp : +13345527213 After doing thorough research on this recovering firm I found several testimonials on how they have helped victims of scam. I can testify that they actually delivered excellent service, and with the help of their agents I was able to successfully recover my lost funds in 48 HOURS. I came out because I wanted to help people like me who had lost all hope after being scammed and I can attest with sincerity and assurance that I got the best service in regards to my problem
Belinda Leonald, e-mail, 17.01.2023 17:20
I was actually fooled and scammed over ( $753,000 ) by someone I trusted with my funds through a transaction we did and I feel so disappointed and hurt knowing that someone can steal from you without remorse after trusting them, so I started searching for help legally to recover my stolen funds and latter came across a lot of Testimonials about LORD HICKER ULTIMATE, an agent who helps in recovering lost funds, which I can tell has helped so many people who had contacted them regarding such issues and without a questionable doubt their funds was returned back to their wallet in a very short space of time, it took the expert 48 hours to help me recover my funds and the best part of it all was that the scammers was actually located and arrested by local authorities in his region which was very relieving. Hope this helps as many people who have lost their hard earned money to scammers out of trust, you can reach him through the link below for help to recover your scammed funds and thank me later. Email Address: L.H.ULTIMATE @ FASTSERVICE . COM) Or WhatsApp : +13345527213
DANIEL RAY, e-mail, 01.12.2022 05:00
EVER BEEN A VICTIM OF CRYPTO SCAM???
HELLO EVERYONE, This is for everyone seeking recovery of stolen crypto coins, recovery of any lost funds to online scams , recovery of cryptocurrency lost to reapers in forex trades and binary options This is for persons seeking to recover all of their lost funds to online scams, contact address--> Morris Gray 830 @ gmail . com for successful recovery and thank me later. I had my blockchain wallet spoofed by merciless scams, due to the ignorance of 2FA authorization, they were able to get away with 5.0147BTC from my wallet , this made me go through Truma and depression as i was desperately in need of help , i made my research online and came across a very credible and reliable recovery agent on the internet with this information Morris Gray 830 @ gmail . com, The hack agent helped me recover all I lost and also revealed the identity of the perpetrators , that's why I'm most appreciative and also sharing their contacts info for anyone in a similar situation seeking to recover funds lost to online scams , contact the recovery specialist at: Morris Gray 830 @ gmail . com or Business Whats app: +1 607 698 0239. Bless you sir Morris Gray....
DANIEL RAY, e-mail, 01.12.2022 05:00
EVER BEEN A VICTIM OF CRYPTO SCAM???
HELLO EVERYONE, This is for everyone seeking recovery of stolen crypto coins, recovery of any lost funds to online scams , recovery of cryptocurrency lost to reapers in forex trades and binary options This is for persons seeking to recover all of their lost funds to online scams, contact address--> Morris Gray 830 @ gmail . com for successful recovery and thank me later. I had my blockchain wallet spoofed by merciless scams, due to the ignorance of 2FA authorization, they were able to get away with 5.0147BTC from my wallet , this made me go through Truma and depression as i was desperately in need of help , i made my research online and came across a very credible and reliable recovery agent on the internet with this information Morris Gray 830 @ gmail . com, The hack agent helped me recover all I lost and also revealed the identity of the perpetrators , that's why I'm most appreciative and also sharing their contacts info for anyone in a similar situation seeking to recover funds lost to online scams , contact the recovery specialist at: Morris Gray 830 @ gmail . com or Business Whats app: +1 607 698 0239. Bless you sir Morris Gray....
Fernando Abasolo, e-mail, 21.11.2022 02:43
Hello Steve,
Do you still have Super Puma parts?
Regards,
Steve Tanner, e-mail, 06.07.2017 02:48
I have New, Overhauled, and Repaired (Serviceable) AS 330 Puma Parts for Sale. M/R Blades, Landing Gear, Indicators, Pumps, Oil Coolers - complete list available upon request.
1-512-985-5203
Mughal, e-mail, 27.11.2015 03:54
Absolutely world class machine. I wonder why french donot make it any longer. Newer versions may look dandy but SA-330 is no match once it comes to reliability and ruggedness.
chris, e-mail, 27.12.2014 05:39
great machine..a lot of memories in 1972 flying in formation over snowed german country....miss all that !!!!!!!!!!!!!!!!!..and brand new smell ...
Qaiser Mehmood, e-mail, 29.03.2014 19:19
Respected Manager' please send me 1* hard copy of SA330j version puma Tumo4c engine Instruction Manual. with best regards. Hoping for your favourable reply.thanking you.Pakistan.
Jeff Small, e-mail, 31.12.2013 01:06
I own a rotor blade repair facility in Sanford, Florida. I have a customer needing tail rotor blade p/n 330A12-0005-14 inspections. I am in need of data to add this blade to my repair station.
Qaiser mehmood, e-mail, 04.10.2013 00:36
I work on this Heli 10 years.it is best for all weather,areas,region.excellent performance. good wishes and best regard.Qaiser mehmood from pakistan.
yaseen asghar, e-mail, 09.09.2013 22:15
very nice hell
Dale Fletcher, e-mail, 11.11.2012 18:34
I think the gunships in the rambo movies were just pumas made to look like russian hinds.
mustapha yusuf, e-mail, 02.11.2012 00:51
i want the wirinq diaqram of super puma 332 A1A MAKILA enqine
shadrack muruka, e-mail, 25.02.2012 05:03
I have worked on variety of helicopters in military, puma being one of them. Where can I get more information about instruments in sa 330 puma aircraft? Best regards.
shadrack muruka, e-mail, 25.02.2012 04:43
I want to know more about electrical system of sa 330 puma aircraft. Where can I get information? Thank you in advance.
Jaco Kelly, e-mail, 01.09.2011 14:00
Hi I hope anybody can help we have some old Puma instruments No 1 A Repetiteur ind by SFENA Model 280-6 it’s a dual ADI/HIS indicator No 2 a Vertical Gyro P/N# 5039 I am in desperate need of the pin-outs or maintenance manuals or wiring diagrams for these unit especially item No 1 Thanks in advance Jaco
Jaco Kelly, e-mail, 01.09.2011 13:50
Hi I hope anybody can help we have some old Puma instruments No 1 A Repetiteur ind by SFENA Model 280-6 it’s a dual ADI/HIS indicator No 2 a Vertical Gyro P/N# 5039 I am in desperate need of the pin-outs or maintenance manuals or wiring diagrams for these unit especially item No 1 Thanks in advance Jaco
Neshat, e-mail, 05.08.2011 10:26
Please send me the prise for SA 330 puma
Fletch, e-mail, 26.12.2009 20:52
Good day to all from the Bratwurst and Sauerkraut side of life, I own a Heller 1/50 scale very (!!!) basic Puma model kit. I would like to finish this as a RAF No.18 Sqn HC1. Unfortunately these Set does not include any Air Intake Filters at all such as used with the RAF in the 1990's. Is anybody able, to supply me with specific photographs and measurements (length, dia, etc.) reference these Air Intakes? May I find pre-manufactured model material, to come as close as possible to it, or will get manufactured resin Air Intakes in 1/48-1/50 scale. Same point of interest are the front side aerials below the cockpit. Please send your info to the indicated eMail address. All Info are used for private model building resource only and will not be published at all.
Thank you very much for your support!
Kind regards / Mit freundlichen Grüßen
Fletch
asi, e-mail, 04.11.2009 15:56
ONE OF THE BEST MACHINE OF ITS TYPE BUT I AM FACING PROBLEMS IN GETTING THE LATEST FLIGHT MANUAL OF PUMA SA 330 L..........i shall be grateful if i get a copy of it because being a puma pilot i desparately require it...........
Fadly, e-mail, 04.11.2009 15:29
Greetings..
I Just want to inform, that our company had stock spare part for PUMA SA-330, in many kinds, types and condition. also with negotiable price. if interested i can show more detail. please contact us.
Best regards,
JAGDISH RAJPAL, e-mail, 25.10.2009 17:37
I WANT TO KNOW MORE ABOUT THE ELECTRICAL SYSTEM OF PUMA.FROM WHERE I CAN GET IT.PLS HELP.
Rhonex, e-mail, 08.09.2009 07:06
I HAVE BEEN WORKING ON 3 TYPES OF HELICOPTERS,SA 330J PUMA BEING ONE OF THEM FOR 10 YEARS NOW. IT IS INDEED A STRONG RELIABLE FLYING BASKET THAT CAN EXECUTE MANY MISSIONS BUT THE ONLY PROBLEM I HAVE SEEN IS NOISE. THERE IS A LOT OF NOISE IN THE CABIN AND COCKPIT.
Askar, e-mail, 01.07.2009 10:35
I HAVE MAINTAIN (MECHANICAL & ELECTICAL) THIS HELICOPTER APPROXIMATELY FIFTEEN YEARS AND ALSO FLY WITH THIS HELICOPTER AS FLIGHT ENGINEER IN VARIOUS VERSIONS SUCH AS MILITRY,TRANSPORT,SLING OPS,20 MM GUN OPS, PARA DROPPING,HOISTING MISSION ETC IN MY COUNTRY AND ALSO WITH UNO PIECE KEEPING MISSION. IT IS REALY GREAT HELICOPTER INTH WORLD. i AM PROUD OF PUMA.
TITUS, e-mail, 26.06.2009 23:48
SA330J's Parts for Clearance Sale : Some body need these NS parts ? http://aircraftsurplusparts.blogspot.com/
ghauri, e-mail, 28.02.2009 08:38
The State of the art helicopter which can meet any mission...It would not be wrong to say " PUMAS CAN DO MIRACLES ".....
I AM A PROUD PUMA PILOT, MAY I REQUEST FOR A ON LINE SUPPORT AND SOFT COPY OF UPDATED FLT MANUAL..
<0>, e-mail, 21.06.2008 23:52
Web forums are unexceptable sources of information.
:p
"STINGRAY", e-mail, 29.08.2007 02:33
THE REASON WHY THE NEWER XPTI PUMAS (XTP-1 "BETA") HAD FENESTRON DESIGNS, IS BECAUSE ATLAS WANTED TO DEMONSTRATE A ROOIVALK WITH A FENESTRON. WHY? WELL, THE ARMAMENT WAS DEMONSTRATED ON THE XTP-1 AND THE TRANSMISSION AND DYNAMICS ARE ALMOST THE SAME. ITS ALMOST LIKE FITTING ONE ON AN ALREADY BUILT ROOIVALK! SORT OF. HOW ATLAS MADE THE FENESTRON SUCESSFUL, I DON'T KNOW. ITS TOO BAD THAT THE ROOIVALKS ALREADY FLYING DON'T HAVE FENESTRONS. THAT WOULD BE COOL!
"STINGRAY", e-mail, 29.08.2007 02:30
THE REASON WHY THE NEWER XPTI PUMAS (XTP-1 "BETA") HAD FENESTRON DESIGNS, IS BECAUSE ATLAS WANTED TO DEMONSTRATE A ROOIVALK WITH A FENESTRON. WHY? WELL, THE ARMAMENT WAS DEMONSTRATED ON THE XTP-1 AND THE TRANSMISSION AND DYNAMICS ARE ALMOST THE SAME. ITS ALMOST LIKE FITTING ONE ON AN ALREADY BUILT ROOIVALK! SORT OF. HOW ATLAS MADE THE FENESTRON SUCESSFUL, I DON'T KNOW.
"SUNRISE", e-mail, 06.07.2007 00:22
TECHNICALLY THE IAR-330 IS NOT THE ONLY GUNSIP PUMA CLOSE TO THE MOVIE PUMAS. THE XPTI-330 PUMA--DERRIVED FROM PUMA ORYX CONFIGURATION FOR R.A.F.--HAS WEAPON CONFIGURATIONS ALMOST SIMILAR TO THAT ON THE MI-24-BASED PUMAS IN THE MOVIE, EXEPT THE WINGS DON'T HAVE WINGTIP MOUNTS FOR ATGMs OR AAGMs (MISSILES). THE XPTI PUMA CAN CARRY A MACHINE GUN OR MINIGUN UNDERNEATH THE NOSE, LIKE ON THE MOVIE, OR A SPOTLIGHT. FURTHER DESIGNS SAY THAT IT FEATURED A SUCCESSFUL FENESTRON TAIL DESIGN ON LATER XPTI MODELS. TOO BAD THE EARLIER FENESTRON DESIGNS ON THE 1960s PUMAS WERE FAILURES.
Maranhao, e-mail, 30.03.2007 23:40
Nooooo! the puma shown in the movies have fake wings and armament. The closer of an "Gunship Puma" is the IAR-330, special romenian/israeli puma upgrade. Thanks!
TRAVIS, e-mail, 25.11.2006 10:18
I HAVE SEEN THIS HELICOPTER IN THE SECOND AND THIRD RAMBO MOVIES WITH 2 COMBINATION ROCKET AND MACHINE GUN PODS AND ANTI-TANK MISSILES ATTACHED TO SPECIAL ARMMAMENT WINGS. IF THESE ARE ACURATE ARMMAMENTS, THERE SHOULD BE GATHARED PHOTOGRAPHS, DRAWINGS, OR BLUEPRINTS THAT ILLUSTRATE AND DISCRIBE THESE ARMMAMENTS ATTACHED TO THIS AIRCRAFT.
