The only prototype built flew for the first time in 1945.
| ENGINE||1 x Franklin 4ACG piston engine, 113hp|
| Take-off weight||764 kg||1684 lb|
| Empty weight||346 kg||763 lb|
| Wingspan||9.14 m||30 ft 0 in|
| Length||6.98 m||23 ft 11 in|
| Height||2.12 m||7 ft 11 in|
| Wing area||16.43 m2||176.85 sq ft|
| Max. speed||177 km/h||110 mph|
| Ceiling||4120 m||13500 ft|
| Range||856 km||532 miles|
|Daithi, e-mail, 08.10.2014 01:35|
For Robert and Bob - search on outerzone.co.uk as there's a plan there for the Piper
|Frank Elliott, e-mail, 21.06.2013 18:12|
Are there any plans, 3-views, etc that a model builder can use to build a model, static or flying, of this aircraft - Piper PA-7 Sky Coupe? See question from "Robert" on 30-11-2011.
|Robert, e-mail, 30.11.2011 04:27|
When I was a kid, back in the 50s, I had a comic book on aviation that featured this plane with an open cockpit. The cover was missing along with several pages so I couldn't tell what the title was, but it had been published in the late 40s. I've been searching for this book for decades and this is the first clue that I've gotten.
|Bob Moser, e-mail, 06.01.2011 19:38|
Does the prototype still exist? Museum exhibit?
|Ray, e-mail, 13.11.2009 19:22|
I'd also like to have a 3-view or drawings of this plane.
|Bob McDaniel, e-mail, 15.02.2008 16:23|
Do you have any 3-view or other info on this aircraft....
been looking for info on it to build a R /C 1 /4 scale flying model of it.....Built the Piper PA-8 Skycyle in 1 /4 scale 45 years ago it is now at the piper museum. i also built a 1 /4 scale luscombe model 10.....Can i get a copy of the photo of the PA-7....
Thank you in advance for your help, consideration of this project....Bob McDaniel
Do you have any comments?
All the World's Rotorcraft