Adams-Wilson XH-1 "Hobbycopter"
by last date | by total length | by number


LATEST COMMENTS

01.06.2020 16:55

Westland "Whirlwind"

01.06.2020 04:26

Kaman K-16

01.06.2020 03:27

Mil Mi-17

31.05.2020 16:39

A-B Helicopters A/W 95

27.05.2020 06:20

25.05.2020 16:37

25.05.2020 06:41

23.05.2020 00:21

Focke-Achgelis Fa-330 "Bachstelze"

22.05.2020 21:07

AirScooter II

22.05.2020 18:48

Messerschmitt-Boelkow-Blohm Bo-105

21.05.2020 14:59

21.05.2020 05:18

Mil Mi-8

20.05.2020 10:07

19.05.2020 06:25

Innovator "Mosquito"

19.05.2020 03:29

18.05.2020 04:08

17.05.2020 22:28

17.05.2020 15:39

Westland "Wessex"

16.05.2020 22:14

11.05.2020 15:15

RotorWay "Scorpion"

10.05.2020 19:31

09.05.2020 02:33

Kamov-Kumertau "Rotorfly"

05.05.2020 22:00

Adams-Wilson XH-1 "Hobbycopter"

05.05.2020 20:41

Revolution Helicopter Mini-500

04.05.2020 05:43

04.05.2020 04:26

Breguet-Richet Gyroplane No.1

03.05.2020 20:05

01.05.2020 15:31

Avian 2/180 "Gyroplane"

30.04.2020 17:29

24.04.2020 14:08


MED - Ben, e-mail, 05.05.2020 22:00

hi, can you send me send me the plans?
thank you


MARIAN, e-mail, 21.04.2020 03:00

hello , how can buy a kit ?thanks


mohamaadreza, e-mail, 16.02.2017 00:26

hi map hlicopter A/W 95 tank


rajendra, e-mail, 12.07.2016 05:13

god


ashraf, e-mail, 22.06.2016 14:33

send me plz the one man helicopter plan at my email


shyalan, e-mail, 26.05.2016 15:06

Dear Sir,
I would like to recive a instruction on how to build this helicopter.


shyalan, e-mail, 26.05.2016 15:06

Dear Sir,
I would like to recive a instruction on how to build this helicopter.


talkhak, e-mail, 15.10.2015 01:53

hi i am looking for the peopele can buy some materiale to build ower own light helicopter or aircraft .i am in aviations maintenance scince 40 years ,the one i can build up cost much less than others i will explain you how when you contact me. thanks


royce short, e-mail, 27.07.2015 03:46

I belILve this outfit is nothing but a SCAM.


Joe frost, e-mail, 18.06.2015 06:25

Please Email me some prints and specs


mohit, e-mail, 31.05.2015 21:57

I will like to get the plans pls send to my email


Ahmad Abdolahi, e-mail, 19.05.2015 10:58

I need the full map of the single man helicopter to made it.


nurkolim, e-mail, 06.04.2015 07:17

id like to give me pdf for ultralight helecopter design


phool shah, e-mail, 19.02.2015 12:06

Respected Sir ,
i wish to make my own single sea chopper kindly email me full maps of structure and all work thanks


dhamal manoj, e-mail, 30.12.2014 16:56

Have you any free plan so really


roger short, e-mail, 29.12.2014 05:33

i am intestered in this heelicopter. will you send me more info. please thank you


wisam, e-mail, 26.12.2014 20:20

hi
plz send me maps for build
tanks


mark, e-mail, 03.12.2014 19:52

I have a complete AH1 for sale. has not flown in years . spare engine.


roger short, e-mail, 30.11.2014 03:25

i am very interested in the aircraft. will you email me some information? thanks roger


sami, e-mail, 02.11.2014 14:55

how a get the plans ????? plz


naser, e-mail, 31.10.2014 20:15

hi
plz send me maps for build
tanks


Bidyut Nag, e-mail, 13.07.2014 15:45

Hellow Sir,
I am Bidyut ...I am a mechanical engineer... all ready I have make a chopper bike wkth a old 535cc enfield bullet engine... i want to know the besic principal of a helicopter.... plz give a besic design of it. Thank you.


Atif Ahmad, e-mail, 21.04.2014 15:38

how i make a hobbycoptar pease send me details im from kashmir India


lord malcolm, e-mail, 21.03.2014 23:17

how much is a kitor part kit
i am in the u.k.
can you just get the rotor shaft and rotor blads


Akshay, e-mail, 11.03.2014 18:35

Please Send Full Detail and cost.
tool kit where we provide and contact information.


Jess, e-mail, 23.11.2013 09:37

Can you please email me with details how to purchase a complete kit . Thankyou


Diego, e-mail, 17.11.2013 23:50

send me please, i wanna learn how to build


Aaron Thomas, e-mail, 05.10.2013 23:50

Hello,i have a complete running hobby coppter,with a brand new set of flecinstien alloy blades never mounted to copter,but also have main fiberglass blades,copter has been flown years ago,sat for 30+ years is running grea and could be easily flyable or added to a collection,contact me for pictures and price


steph, e-mail, 21.08.2013 08:25

still have it forsale?


joey, e-mail, 11.08.2013 22:01

seeing isf those selling them still have them ie jeffand larry at comcast if so leave me a note have cash and time to all others I have schema of parts and a list of parts avaiable all the peps selling plans ship them anywhere


Hari Haran, e-mail, 05.07.2013 21:01

Hello Sir Its me from tamilnadu
can i know the operating mechanism and the cost
for lifting a weight of minimum 50tonns
and is this possible practically
plz rply me as soon as posible by you


Todd, e-mail, 27.06.2013 23:40

I have access to a pretty cool shop, I have made many cool things. However with that being said, I have always wanted to build my own Choppy. I ordered the plans and I was very exited, when they got hear I was really let down. I can't make heads or tails of them. I was hoping that someone out their could give me a hand.


William, e-mail, 04.06.2013 17:31

Can I ask for details of how to go about purchasing a set of plans, please ? I see many people asking the same question, but no answers. No problem for payment, VISA, Wire Transfer, whatrever you need is fine by me ..... and Thank you.


chai, e-mail, 06.05.2013 11:29

pls. let me know the price helicopter kit .....thanks alot


jnourali@yahoo.com, e-mail, 17.04.2013 18:53

Hi
Can you help me for building the Sigel helicopter?
I want a price and property engine lite helicopter


jeff crites, e-mail, 21.03.2013 01:24

i have one of these hobbycopters for sale if any one is interested please email me for pics and info


jeff, e-mail, 14.02.2013 00:39

I have found one of these choppy helicopters and in process of buying it this one has a Kawasaki motor on it but it is a mid 60's is there any thing that I should look for thanks Jeff Petersburg wv


jeff, e-mail, 14.02.2013 00:38

I have found one of these choppy helicopters and in process of buying it this one has a Kawasaki motor on it but it is a mid 60's is there any thing that I should look for thanks Jeff Petersburg wv


nadeer, e-mail, 19.01.2013 14:00

I need to purchese so pleezz can help me am.very interesting of this how much prize to pay


John Wilcox, e-mail, 18.11.2012 08:59

Send me more info and how to order the complete kit - Please rush !!!!


muthana, e-mail, 13.08.2012 13:06

Hi lm from lraq pleas send to me the kit


Jay, e-mail, 20.04.2012 15:34

I saw that many people want plans for the AW Choppy

Here is a link from a reputable company to buy the plans.
tinkersource.com/adams-wilson-hobbycopter.html


Arturo L., e-mail, 18.04.2012 21:42

Buen dia SeƱor. Quisiera saber si puede usted facilitarme informacion sobre este Hobbycopter, como por ejemplo sobre los planos, piezas en general y el costo del Kit de este helicoptero.
Puerto Ordaz. Venezuela.


Drew C, e-mail, 14.03.2012 05:40

Hello, I would like the info on purchasing a kit. Please get back with me so we can set up payment and shipment of product. Thank you!


Azat, e-mail, 23.02.2012 07:44

Hello! I from Russia and since the childhood dream of the sky and helicopters. Send me please the plan, drawings of the helicopter single? Choppy the helicopter


Benjamin ashorgbor, e-mail, 04.02.2012 10:03

I am in africa in ghana and would like to order for a kit how can i do that


wubante, e-mail, 04.01.2012 21:35

hellow i want to make it my self by local do you think i can?


wubante, e-mail, 04.01.2012 21:31

hellow i want to make it my self by local do you think i can?


yanuwar, e-mail, 21.11.2011 06:40

Yes ...! Good..good for Adam Wilson, may be learn me you helicopter disingh, give to me..!


Aknon, e-mail, 21.09.2011 00:28

Dear Mr.
Hi
it possible to you that send me plan of this helicopter?
please,please
many thanks


c v padmakar rao, e-mail, 31.07.2011 17:28

your helecopter design is well and good please send me a kit as a friendly gift which willbe publicity to sell your kits in india our city is vishakakapatnam state andhrapradesh thankyou with best regards


Anthony ambei, e-mail, 12.06.2011 23:14

Being able to built utra light helicopter bring physics motion law an gravity pull law into real practice also educate many expecialy in africa.


tsheten, e-mail, 07.06.2011 14:58

Of course,i have a lot of comments but not about this aircraft but the site.I posted a comment a long time ago and still dint get any reply.Anybody there to post me a reply?
Moreover,I believe i am not only the one facing this crisis.


TSHETEN, e-mail, 28.05.2011 16:19

Respected Sir,I really liked this copter and i also want to build one.But since I am in bhutan and with the limited technology,i dont think i wil be able to make one.But i really wnat to do it.
Wil u plz give me some ideas regarding the minimum power of the engine and rpm of the main and tail rotors to lift a 50kg guy like me.Also specify me the kinds of materials for the airframe.
And most importantly,will it be possible for you to send me some free plans to do it?I would remain grateful sir could send me all the blueprints.Thanks a lot


Debashish Chatterjee, e-mail, 11.05.2011 18:46

Sir
Thank you verymuch for this kinds of information. I also like to make a one setted Helicopter. Can I built it a motor byke engine? Please send me how minimum cost I can built a one seted Helicopter. Thank you.


Scott, e-mail, 11.05.2011 01:13

I would like a kit that is 100% ready so all I have to do is bolt it together and fly, is yours like this? And if not, where should I look?


neda, e-mail, 30.04.2011 23:21

hi dear
i need some information a bout your product so can i ask a bout it?i want now about price and kind of from engine so please answer me im on line in msn and this is my mail
beast regards
neda


Vishal, e-mail, 27.04.2011 19:02

Sir,i am planning to make helicopter can you please tell me whats' the minimum rpm and hp for small helicopter to lift one person? You can contact to my id
Thanx a lot!


masood, e-mail, 24.04.2011 08:08

thanks for your data!your idea is very interesting...from iran


Vishal, e-mail, 17.04.2011 13:37

Hello i live in india may i know if rotor blades rotating in alternate direction are avaible with you may i plz know the cost.
thanx


mitraabadi, e-mail, 05.04.2011 05:05

praktis dan sederhana, cocok untuk pengembangan hobby, tapi bagaimana dengan jaminan keselamatan untuk pilotnya ya..


kham, e-mail, 24.03.2011 06:11

สวัสดีครับ
send me plan of this helicopter please
many thanks


kham, e-mail, 24.03.2011 06:08

สวัสดีครับ
send me plan of this helicopter pleas
many thanks


ali, e-mail, 21.03.2011 18:12

s it possible to you that send me plan of this helicopter?
many thanks.


bill o, e-mail, 28.02.2011 23:28

hi i was wondering if the xh1 kit is still avibale or a simular kit thank you bill o


VISWAS VISWAM, e-mail, 23.10.2010 15:58

Respected sir I am a aeronautical stuident from INDIA and iam very fond of single seater helicopter. So please help me to construct a single seater helicopter and also suggest its parts too. thank you


Ellery, e-mail, 07.10.2010 20:17

Where can i get plans and kit, also how much is kit


sunil kumar, e-mail, 18.09.2010 13:42

sir, please tell me diagram and method for make a helicopter by old motorbike engine


aso, e-mail, 13.09.2010 19:23

how to attach the main shaft to the engine, please explain


keattikun ponasuwan thailand, e-mail, 17.07.2010 22:49

hi.i am keattikun ponasuwan i live in thailand

the hobby very nice,and i like it.very much

how much everything for hobby copter,

and i want open the shop for sale aero part for choppy.aw95.hobby copter /you can help me.

you see me on youtube, helicopter turbine thailand

thankyou very much,

keattikun ponasuwan thailand

sorry, i write english no good,

help me please


jjsiewertsen, e-mail, 15.07.2010 16:09

how to obtain plans etc. in holland?


Robert Keller, e-mail, 01.06.2010 08:40

I recently purchaased a set of plans for an Indian light helicopter, which is a very poor copy of your XH-1 Hobbycopter. This man is in Orange, CA. Is this a li9censed set of plans. It is a puzzle to say the least. I have to re-engineer these plans to make any sense at all.


warren, e-mail, 02.05.2010 06:24

how much does it cost


hadi kavusi, e-mail, 18.04.2010 11:40

hi
please send me detail of main rotor blade and tail rotor blade ultralight helicopter
tanks you


ali, e-mail, 09.04.2010 21:08

hello
may you pleas help me how con i build a light helicopter and where can i found plans to build it
thanks


DOYLE, e-mail, 25.03.2010 22:47

Hello,can you tell me if there are still kits available for the hobbycopter and how much they are thanks


alan kearney, e-mail, 01.03.2010 20:51

Are there plans available to build a hobbycopter?

And if so what do they cost?

Thanks


DENNIS HEINY, e-mail, 20.02.2010 00:31

HOW DO I GET PLANS


alijaleel, e-mail, 27.01.2010 14:38

id like to give me pdf for ultralight helecopter design


Mukesh, e-mail, 11.01.2010 10:29

Hi!i was just wondering if can i order the parts to india.


Ulfhed, e-mail, 10.01.2010 08:06

Plans: http://www.4avia.ru/choppy


Pasquier hubert, e-mail, 02.11.2009 12:29

where can i found the plans?the kit?
is it possible to change the engine ?
4 cylinders?
thanks


pasquier hubert, e-mail, 28.10.2009 13:26

where can i buy plans of adams helicopter? and the kit ?
thanks


jeff, e-mail, 19.10.2009 08:49

hey i have a xh-1 hobbycopter with the triumph running gear i dont have plans or scamatics for it but would like to get a hold of some for refrenceing how would i go about this?


nikhil, e-mail, 15.10.2009 11:37

sir i am btec student can u pleasse send me the procedure how did u do this ia also intrested


Naveen kumar, e-mail, 18.08.2009 22:01

Sir, Please tell the Cost of your helicopter kIt. AND you are able to Send your kits to india


alex, e-mail, 14.07.2009 03:32

where could i possibly obtain plans for the xh-1
thankya


vivek, e-mail, 02.07.2009 10:38

sir i am a amateur giro glider bulider.i built giro i flied it . at the time of fling it craset.i have rotercraft plan . problem is this plans printed at 1977.(this plan are my grand-father). plesa sugest me shal i build helicopter wiht old plan


vivek, e-mail, 02.07.2009 10:30

sir i am a amateur giro glider bulider.i built giro i flied it . at the time of fling it craset.i have rotercraft plan . problem is this plans printed at 1977.(this plan are my grand-father). plesa sugest me shal i build helicopter wiht old plan


AGBESSI, e-mail, 15.05.2009 15:06

what is the function of the tail rotor of the helicopter.be my support to make it successfull...


AGBESSI, e-mail, 15.05.2009 14:58

GOOD DAY!!, I AM A DESIGNER, I NEED MORE PLANS FROM YOU AND IF POSIBLE I CAN SEND TO YOU SOM OF MY DESIGNS...


philip, e-mail, 13.05.2009 06:00

hi i just purchased plans on the indian helicopter ,and then found this hobbycopter and couldnt help but notice that it looks the same .. my problem is that my plans are not that good and was wondering if you sell plans or have pictuers i could see clearly to make out the main drive parts please contact me as soon as you get the chance thanks philip hopper


Luiz Henrique, e-mail, 06.03.2009 02:52

Dear Mr.
what is the cost of the kit? or what can I do for get the plans. Please send me your diretion.
Thak you


Yanus Arfian Suyamto, e-mail, 29.01.2009 07:42

I'am Indonesian I want to built at home how much? and why?


jimmy carolan, e-mail, 29.01.2009 00:20

hi,how do i get the kit for this helicopter,and how much would it cost,including postage,to send it to ireland?
thank you.


Manfred Richter, e-mail, 29.12.2008 14:01

May I get a plan and some pictures of the swashplate construction ?
Thanks, Manfred


majid, e-mail, 30.11.2008 13:41

is it possible to you that send me plan of this helicopter?
many thanks


shayan, e-mail, 13.11.2008 22:18

Hi dear please help me
I'm making a choppy helicopter.
please send me a plan for made a choppy helicopter


scott, e-mail, 13.09.2008 18:47

Sir
the kit is $900 right? and what is the safet rate
can you please let me know
thanks


Kelly Spikes, e-mail, 05.09.2008 05:20

I am very very interested in you product, the Adams-Wilson XH-1 hoobycopter. I would like to know the price and if there is any I could purchase or look at around Bryan, Texas. I would like to know how to order a kit if I decide to purchase your product. Thank you


Kelly Spikes, 02.09.2008 23:58

I would like to know the price and other information about your product. I live in Normangee, TX and I want to know if there are any around here that I may look at or purchase


allen berry, e-mail, 30.07.2008 04:17

price please on hx-1 and what comes in the kit and what it takes to assy


larry, e-mail, 23.07.2008 01:35

I have a complete aw95 helicopter for sale, with or without the hirth 2706 engine.plus i also have spare parts if anyone is intrested.I will be going to mentone,IN. for the pra event if someone wants to meet me and look at the stuff.To check on the pra event go to www.pra.org, for the dates.Please call me if you have any qyestions 574-870-3416. thanks


d.smith m.d., e-mail, 10.07.2008 04:03

what is the cost of the kit? i noticed in the schematic drawing there seems to be no collective lever- is that correct? (if so is it a gyrocopter.. ???)is there a sales outlet you could refer me to in so. cal.?
much thanks,
d. smith m.d.


d.smith m.d., e-mail, 10.07.2008 04:03

what is the cost of the kit? i noticed in the schematic drawing there seems to be no collective lever- is that correct? (if so is it a gyrocopter.. ???)is there a sales outlet you could refer me to in so. cal.?
much thanks,
d. smith m.d.


James, e-mail, 26.02.2008 23:48

What does the kit include, and how much does it cost to complete the whole assembly? Thanks.


Gerry, e-mail, 12.12.2007 22:05

Hi i am building a AW95 nearly finished just making main rotor to day. Only problum i am having is geting my main rotor blades i live in the uk is there any body else from UK building a AW95 thanks. Gerry.


frederick, e-mail, 15.11.2007 03:27

where can i get the plans and parts?


Kuzyk, e-mail, 16.10.2007 16:37

Like everyone else where do you get plans. How complete are the plans.


Chris, e-mail, 26.09.2007 01:40

I too would like to know where to obtain plans and parts. Can you assist me? Thank you.


FERMAUT, e-mail, 22.09.2007 00:43

Hello.
How to get the plans?
Have parts the available ones?
How the rotors are factories.
thanks you


adrian quinn, e-mail, 30.08.2007 17:24

how ya doin im just wondering would you send it to ireland




All the World's Rotorcraft


Virtual Aircraft Museum


Sights of Estonia